it is possible, but the odds are really low. as long as you aren't putting your plasma on 24/7 with the wrong settings (contrast at full blast) you are fine. you can see plasmas with burn in at businesses. in vegas, some of the plasmas have the casino logo image burned in cause it has the same thing on every day all day. video games or graphics are the worst culprits for screen burn in.
I think EVERY widescreen TV has that... but... HDMI and DVI should do that for you auto-magically. Shouldn't it? Your post is right on target, though.
Yeah, I definitely knew that videogames were terrible for screen burn (esp. fighting games with the life bars). But I didn't know black bars on movies could burn in. What an informative thread... hopefully this will mean even a few less heathen who buy movies in fullscreen.
http://www.plasmatvbuyingguide.com/plasmatv/plasmatv-burnin.html So, how do you prevent burn-in on your brand-new plasma TV screen? (1) Some obvious advice: Do not leave static images on your plasma TV screen for more than an hour. Turn off your unit when you are not watching it. Do not pause DVDs for more than 20 minutes at a time. (2) Know that plasma screens are more prone to burn-in during their first 200 hours of use. When phosphors are fresh, they burn more intensely as they are ignited. This means that relatively new plasma display TVs are prone to "ghosting", which occurs when on-screen images appear to stay on the screen belatedly. This is a function of the high intensity with which new phosphors "pop," and this phenomenon usually "washes out" on its own, as the screen displays subsequent images. Displaying a bright, or moving snow image (as with a DVD or VCR with no input) will "wash" a ghost image from the screen in most cases. Many plasma manufacturers have installed anti-burn settings, which are monotone gray or snow screen settings which recalibrate pixel intensity levels uniformly - thus eliminating any image retention (ghosting). It is a good idea to run this type of program after the first 100 hours or so. (3) Adjust the CONTRAST setting at or below 50% on your new plasma TV. These days most plasma TVs are preset to either peak or very high contrast (also called picture setting on many TVs). This forces phosphors to glow more intensely, which decreases the length of time necessary for burn-in to occur. Our advice is to reduce the contrast setting to 50% or less for the first 200 hours of use. And, be sure to avail yourself of your plasma's anti-burn-in features. (4) Some plasma televisions burn-in more easily than others. In my experience, AliS type panels -- the ones utilized by Hitachi and Fujistu -- seem more readily given over to problems with burn-in. As well, be more wary of the 2nd and 3rd tier brands as their technology is usually not as up to date as some of the better 1st tier brands. (5) When displaying video games and other content which have static images, use your burn-in protection features like power management settings, full-time picture shift (both vertical and horizontal), and automatic screen-saver functions. Check your Owner's Manual for further information. (6) Realize that quality matters with burn-in as with everything else. Purchase a plasma display that has really good scaling, so that you can watch 4:3 TV programs in widescreen comfortably. It is better not to display black bars on your TV screen for prolonged periods of time (especially in the first 200 hours), so you are probably better off watching most everything in "full screen" mode. This should not be much of a problem todays selection of widescreen HDTV and DVDT content. Also, higher quality TVs tend to be more resistant to burn-in -- though not entirely immune to it. Of the plasma displays I've owned and/or tested extensively, NEC, Sony, Pioneer, and Panasonic seemed least prone to burn-in once the plasma screen was properly broken in. Note: There are some applications which are simply not well suited to plasma display technology. The static flight schedule signage at airports, for example. It amazes me to walk into an airport and see a ruined plasma display monitor hanging from the ceiling with what is obviously an extreme case of permanent burn- in. As LCD monitors have increased in size, they are being used to replace plasma displays in this types of setting. The Bottom Line on Burn-In Plasma TV burn-in is not an issue that should cause undue concern in the average user. With a modicum of caution, most plasma TVs will probably never have a problem with image retention. A viewer may experience temporary ghosting, but this is not cause for alarm. For more about the life span of a plasma TV, please see the article "How Long Do Plasma TVs Last?"
